Notes on using electric shears

- Apr 26, 2020-

The blades of electric shears should be kept sharp. When cutting super hard steel or stainless steel, a separate blade is required.

Adjust the gap between the upper and lower blades according to the thickness of the shear plate, the gap value refers to the edge gap table;

Check whether the tightening bolt is loose, whether the protective cover is installed correctly, and whether the lubrication point is fully lubricated.

Check the control device, whether the operating mechanism is flexible and normal, and the transmission parts are free of obstacles;

Carry out the idling test. If it is normal, the upper knife holder can perform idling reciprocating motion.

When the movement mechanism of the electric scissors is normal, it can be cut.

If damage or blunt objects are found, they should be sharpened or replaced in time.