Precautions for use of electric shearing and cutting machine

- Jul 11, 2019-

The edge of the electric shearing machine blade should be kept sharp. For example, when cutting ultra-hard steel plate and stainless steel, an additional blade is required.

Adjust the gap between the upper and lower blades according to the thickness of the shearing plate. The clearance value refers to the cutting edge clearance table.

Check whether the fastening bolts are loose or not, whether the protective covers are installed, and whether there is sufficient lubricant in each lubrication point oil passage;

https://www.roll-forming-machine-china.com/related-machines/shearing-bending-roll-forming-machine/

Check each control device, whether the operating mechanism is flexible and normal, and there is no obstacle in each transmission part;

Perform an idle test, if normal, the upper tool holder can make an idle reciprocating motion.

The movement mechanism of the electric shearing machine is normal and can be cut.