Roof machine Feature introduction

- May 14, 2019-

Roof machine Feature introduction


Feature 1: The first and second generations of “automatic molded color tile equipment” are all “swing cylinder drive slide table”, and “swing cylinder” belongs to “moulded color steel tile equipment” which is “very vulnerable” accessories. If the forming speed is too fast, the sliding table has a large impact force, and the buffer is easy to vibrate, resulting in cracks in the tile, which is a "disease" in the first and second generation color tile equipment. Therefore, the molding speed is up to 6 pieces per minute. And "HJ-10---guided four-column molded color steel molding equipment"

Feature 2: Guided four-column type HJ-10--High-speed boutique mould color steel pressing equipment: using a number of advanced technologies, the main body "body" is not welded, all are made of "cast steel", so the whole machine will not The "host" fuselage is deformed due to "stress" caused by "welding". The main body "pressure cylinder and main tile mold" is bound by the "guide sleeve" on the 120mm "four solid-oriented hydraulic props". The "main tile mold" runs vertically up and down without vertical deviation, especially for the main tile mold. The vulnerability is absolutely protected, and it also greatly extends the “main tile mold. There are many types of tile presses. Let us introduce a common color steel tile press model.

standing seam machine3