Before the use of the column machine Purlin machine, to see whether the connection can be reliable, device bolts, nuts can be tightened, left and right chassis should be added to the smooth oil, can be electrified engine for commissioning. Column Machine Purlin machine application of the mold needs a die and six of the same standard scale of the lower mold, the first device on the mold and a lower mold, the lower die directly device in the six square wheel work table, the mold device in the sliding seat bottom surface, and placed the appropriate thickness of the pad, cover the upper and lower die, the surrounding gap is uniform,
The interval between the upper and lower modes is equal to the thickness of the required tile billet. Then the above mode is accurate, the Operation table transposition, the device other five to pay the mold, all the device good up and down mold in the future ability to drive the pressure tile. First empty work carefully observe, there is no sensation, noise, oil window can come to oil, the movement of the parts can be harmonious, all normal after the ability device mold, device mold, it is necessary to block the power supply, hand carefully move the motor belt or large gear, column purlin machine to make the work table transposition, and make the sliding seat to the highest point, Best with one object between the operating table and the bottom of the sliding seat, in case the sliding seat natural fall, the formation of trouble.