Roofing sheet/Roof tile
Carbon Steel sheet and Galvanized steel sheet
1000mm-6000mm, as customers' request
Clean, blasting and painting according to customer requirement
Factory direct sales
Packed in bundles with standard export sea-worthy package
10-20days after receiving the deposit
High Quality.SGS inspection is accepted if needed
Place of Origin
Construction, roofing, furniture, buiding
a.) Industrial and civil buildings, warehouse;
b.) Special construction;
c.) Steel structure houses and mobile homes, roof, walls, and interior and exterior decoration, etc.
Our main products:
metal building materials
corrugated prepainted steel sheet,
corrugated galvanized steel sheet,
corrugated zinc-alume roof tile,
corrugated aluminum sheet,
corrugated stainless steel sheet,
steel decking floor,
EPS (polystyrene foam) sandwich panel,
rock-wool sandwich panel,
glass-wool sandwich panel,
C purlin , Z purlin.
3 layer Heat Insulated UPVC Roof Sheet is manufactured based on 3 layer co-extrusion technology by one-time processing. It is an ideal building material for construction projects with heat insulation requirement. The following is a list of the distinct features of each layer material.
First layer:weather resistant resin is selected as the top layer material to block the solar ultraviolet radiation and reduce the coefficient of heat conductivity. It provides our UPVC roofing material with great durability and chemical corrosion resistance;
Second layer:the middle layer is a special foam structure with heat and sound insulation performances.
Third layer:the bottom layer of our heat insulated UPVC roof sheet adopts modified PVC material to offer optimum strength and rigidity.Install
*Mind the sharp edge of the sheets in case of any injury.
*Please use a fine -toothed saw to cut the sheet.
*Do not fix screw sets too tight because the sheets will expand with heat and contract with cold. Otherwise, noise might occur when the sheet shrink due to low temperature.
*Screw sets must be fixed at the peak position of the sheets to avoid any leakage.
*The sheets must be installed starting from the opposite direction of local wind direction.
*Can drill hole with hand drill or power drill. When drilling, the sheet should be supported in the bottom side to prevent swaying, and the hole diameter should be 2.0mm bigger than screw.