Corrugated Roof Panel Double Machine

We're professional ceiling main t grid roll forming machine manufacturers and suppliers in China, specialized in providing high quality cold forming machine. We warmly welcome you to wholesale bulk ceiling main t grid roll forming machine at competitive price from our factory.
Chat Now

Product Details

Corrugated Roof Panel Double machine
Length of the main partAbout 6000*1400*1400mm
Weight of main partAbout 5.5 tons
Voltage380V/50HZ3Phase (as customer`s request)
Roller fixerMiddle plate welded
Frame300 H steel welded
Frame thickness16mm
Drive modeChain Drive mode
Material of rollers45# steel, surface hard chromium plating.
Material of shafts45# steel
Diameter of shaftsΦ70mm
Number of rollers14 rollers    
Main power4kw

Details

Roll forming machine
1) Number of forming steps: IBR layer 17 – Corrugated layer 17 steps 

2) Material of shaft: 45# steel hardening and tempering treatment. Outer diameter 70mm ,total solid 3)Tolled shafts rollers: Material is high grade No.45 forged steel, with digital-controlled procession. The rollers are plated with hard chrome with thickness of 0.05mm on the surface after being machined by the exact machine tool. So that ensures long life of forming rollers. 

4) Main motor power: 5.5 Kw with cyclical planetary gear speed reducer 

5) The plating chromium’s thickness on the surface of rollers: 0.05mm 

6) Main stand: 350# H steel welded structure Wall plate thickness: 16mmthe main frame 

7) Chain and gear move the line, motor drives. All working actions are controlled by PLC electric cabinet automatically. 

8) Suitable power voltage: 380V/60HZ/3Phase (can de designed according to buyer’s requirement) Dimension of the machine: about  9500mmx1400mmx1200mmHydraulic Cutting

Hydraulic Cutting  

1) Adopts post cutting, Stop to cut.

 2) The cutting blade material is Cr12 with quenched treatment.  

3) Adopts welded frame for good rigidity. 

4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm. 

5) The power of cutting is provided by hydraulic station. 

6) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the Product automatically. Finish this action, machine will run again continuously.

Introducation and Feature
1
The main parts: 1) roll forming machine 2)molding press 3)cutting machine 4)PLC computer control 5)hydraulic system.
2The machine is stable,no noise,no shake.
3Controlling by computer, PLC display, operation is easy, running is steady and reliable,endurable
4Cutting machine is characterized by stable driving, easy operation.
5Hydraulic system use the CDF-10 hydraulic pump, long operating life,no noise.
6Material: galvanized,colored steel or aluminum coil
7We can make and design the kinds of roll forming machine according to customer's request.


Inquiry