The double layer roof roll forming machine can produce two different types of metal tile products, including trapezoidal tile and corrugated tile.
Manual uncoiler: 1 set
Guiding platform: 1 set
Coil strip leveler: 1 set
Main machine of roll forming: 2set
Electric-motor: 1 set
Cutting device: 2 set
Hydraulic station: 1 set
PLC control: 1 set
Supporter table: 1 set
Roof roll forming machine parameters | ||
1 | Main motor power | 4kW, 3-phase or as your requests |
2 | Hydraulic motor power | 3kW |
3 | Hydraulic pressure | 10-12MPa |
4 | Voltage | 380V/3-phase/50Hz (or as your requirements) |
5 | Control system | PLC delta inverter |
6 | Mainframe | 300/350mm H-beam or 350mm |
7 | Backboard thickness | 16mm |
8 | Chain size | 1 Inch |
9 | Feeding material | color steel coils |
10 | Feeding thickness | 0.3-0.8mm |
11 | Feeding width | 1000mm |
12 | Effective width | 840mm, 850mm |
13 | Productivity | 0-15/min |
14 | Roll station | 13 roll steps (according to different design) |
15 | Roller diameter | 70mm (depends on different design) |
16 | Roller material | 45# steel |
17 | Cutter material | Cr12 |
18 | Cr-plating size | 0.05mm |
19 | Overall size | 6800*1400*1150mm |
20 | Total weight | 4.8 tons |
within 60 days after receiving the deposit.
export standard package for container. Machine is covered by plastic film. PLC control box, spare parts and other small parts are packed by wooden carton box.