Decoiler/uncoiler | Manual decoiler or according to customer requirements |
Cutting blade | Manual cutter |
Mainframe | 400mm H beams, 45# steel |
Number of rolls | Common 9~25rolls (according to different design) |
Chain | 1.2 inch according to machine demands |
Voltage | 220V/50HZ/single phase power or as requirement |
Main motor power | 3~7.5KW or as actual demands |
Hydraulic pump station | Gear pump |
Pump station motor power | 3~7.5KW or as actual demands |
Reducer | 6#/ 8# Gear Reducer |
Hydraulic pressure | 10-12MPa according to the oil pump and pump motor |
Shearing knife | Cr12 / Cr12MOV, heat treatment, HRC 58-60℃ |
Cr-plating size: 0.05 mm | |
Cutting method | Electric cutting |
Control System | PLC Control System, 360 degree rotation |
PLC Display languages | Chinese, English, (Spanish or Russian) |
Productivity | 1.5~3m/min |
Length tolerance | ±2mm |
Cutting tolerance | ±1mm |
Raw material | Galvanized/ Galvalume/ Colored/ Aluminum/ Stainless steel coil |
Feeding thickness | 0.3-1.0mm(Galvanized / Galvalume / Colored / Stainless steel coil); 0.3-1.5mm (Aluminum steel coil) |
Retaining pad: Prevent the nut from loosening.
Easy hanging: Prevent the machine from scratching during the movement.
Travel switch: Limit the position or travel of the machine.
Rear hand knife: cut in advance to prevent waste.
Resin wheel: used to record the length of discharge and record data is more accurate.
Electric control cabinet: Famous brand PLC and motor
Steel glazed roof panel step tile cold roll forming machine is suitable for various industrial workshops and warehouse roofs. The roof tile produced by this machine has high strength, safety and reliability, convenient installation, and good waterproof performance. The plate produced by this machine solves the problem of roof leakage pressure. Compared with the conventional series of plates, it can achieve a beamless arched roof.